The Unique Glass Separator is essentially high fire kiln wash that has been milled a second time, making it easier to apply smooth coats and comes in liquid form. The Glass Separator prevents glass from sticking to molds and kiln shelves. It can also be used to keep pre-drilled holes in your glass open during firing. Simply fill the hole with the thicker separator that is in the lid and allowing it to dry. It pops right out of the hole after firing.
Directions for Use: Brush on 1 – 3 smooth coats to glass saggers/drapes or kiln shelves to prevent sticking. Can also be air-brushed or, apply a pattern of your choice over a brushed coat of the Glass Separator using a squeeze bottle on molds or kiln shelves for a texture design on glass. Can also be used as regular kiln wash. (Non-Toxic).
Unique Glass Separator does not have to be removed or re-applied for each firing. Touch ups may be needed if a chip occurs over time and will need to be re-applied for maintenance. This also applies to stainless steel molds. *Note on stainless steel molds - warm up the mold with a heat gun or in the oven prior to applying the Glass Separator. Or you can put on fan the mold and let each of the 3 coats dry completely before applying the next coat.
This product will save you time and money! 1 gallon
The glass separator is not recommended for casting. For casting, Slumpy's suggest MR-97.